Advertisement
Installation (cont.)
Decor Star
4. Secure the mounting brackets to the wall
with the screws.
5. Apply thread sealant tape to the threading
on the shut off valves before connect both hot
and cold water supply hoses to the valves.
Turn on the valves and check all connections
for possible leaks.
6. Hang the unit on the wall to complete the
installation. Make sure the unit is seated prop-
erly. Apply silicon sealant on left and right
sides of the shower panel. (NOTE: Do not
seal the bottom of the panel, this will allow any
possible future leaks to drain out the panel)
8
PL-004-SS Rev. A4 122015
Advertisement
