Gns 400W/500W Series Configuration - Garmin GTX 335 w GPS Installation Guidance

6.5 GNS 400W/500W Series Configuration

NOTE
Refer to the aircraft specific wiring diagrams for the correct port connections in use.
For all GTX installations, refer to appendix C for GNS configuration.
1. Push and hold the ENT key of the GNS 400W/500W Series unit.
2. Power on the GNS 400W/500W unit.
3. Release the ENT key when the display activates.
While in configuration mode, rotate small right knob to select pages. Change data on the configuration
page:
1. Push the small right knob to select the cursor.
2. Rotate the large right knob to move between data fields.
3. Rotate the small right knob to change a highlighted field.
4. Push the ENT key to accept the entry.
To configure the GNS 400W/500W, refer to appendix C.
190-00734-17
Rev. 1
GTX 335 w/GPS Installation Guidance
Page 6-3