Afms Completion - Garmin GTX 335 w GPS Installation Guidance

4.6 AFMS Completion

Section 1.4 of the GTX 33/330 and GTX 3X5 AFMS is intended to specify the installation configuration
for the GTX system. It is the responsibility of the installer to mark in the appropriate boxes in the AFMS
with indelible ink using the following guidance.
Equipment Installed
The Equipment Installed subsection indicates the type of GTX transponder installed. Mark the boxes as
described for Transponder #1.
[5] GTX 335
Mark box [5] for the installed GTX 335 with GPS transponder, part number 011-03300-40.
Interfaced GPS/SBAS Position Source
The Interfaced GPS/SBAS Position Source subsection describes the GPS position source(s) used by the
GTX transponder(s). Mark the boxes as described for GPS #1, and for GPS #2 if dual GPS sources are
interfaced to the transponder(s).
[1] Internal
Mark box [1] for the installed GTX 335 with GPS transponder, part number is 011-03300-40 and the
Internal GPS source is configured.
Interfaced Pressure Altitude Source
The Interfaced Pressure Altitude Source subsection describes the Altitude source(s) used by the GTX
transponder(s). Mark the boxes as described for Pressure Altitude Source #1.
[1] __________
[2] Garmin Altitude Encoder
Mark box [1] if the installed transponder(s) is interfaced with an external Pressure Altitude Source input
per appendix B and appendix C of this manual. Write the Manufacturer and Model of the interfaced source
in the space provided.
Mark box [2] if the installed transponder(s) is configured to utilize Pressure Altitude from the optional
Garmin Altitude Encoder.
190-00734-17
Rev. 1
GTX 335 w/GPS Installation Guidance
Page 4-22