Installing And Removing Stand; How To Install Stand; How To Remove The Stand - Philips BDL5545ET/00 User Manual

1.5. INSTALLING AND REMOVING STAND

1.5.1 How to install stand

1. Turn off the Display.
2. After inserting the stand in the guide block, tighten the screws on both sides of the monitor.
NOTE:
The long end of the stand should face the front while installing.
Screw
Screw

1.5.2 How to remove the stand

1. Spread a protective sheet on a flat surface.
2. Place the display face-down on a protective sheet.
3. Remove screws using a screwdriver and place them in a safe place for reuse.
Stands
"Longer end
faces the front"
11
User Manual BDL5545ET
Screw
Screw