Philips BDL5545ET/00 User Manual page 46

x Lock - Disable the keyboard.
x Unlock - Enable the keyboard.
Tiling
With this function you can create a single large screen matrix (display wall) that consists of up to 25
BDL5545ET displays (5 displays each on the vertical and horizontal sides). This requires you to connect
each BDL5545ET display in a daisy-chain configuration.
Example:
2 x 2 screen matrix (4 monitors)
H displays = 2
V displays = 2
H displays
x H monitors - Select the number of displays on the horizontal side.
x V monitors - Select the number of displays on the vertical side.
x Position - Select the position of this display yin the screen matrix.
x Frame comp. - Choose to turn on or off the frame compensation function. If turned on, the display will
adjust the image to compensate for the width of the display bezels in order to accurately display the
image.
x Enable: Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in
H monitors, V monitors, Position, and Frame comp.
Note: The Tiling function will be disabled when the ON/OFF button for PIP is pressed.
x Switch on delay – Select switch on delay time for each display yin a large matrix or video wall to
prevent AC inrush current. Use the PLUS/MINUS buttons to make selection (Off, Auto, 1-50 seconds
from switch on).
Note: Touch function for BDL5545ET is set to ON by default. When touch is ON, tiling will be disabled
automatically because the touch only works for single monitor. When touch is OFF, tiling will be enabled
again and the user can set tiling up to 5x5 based on the application.
Position
Frame comp. - OFF
5 x 5 screen matrix (25 monitors)
H displays = 5
V displays = 5
H displays
Frame comp. - ON
45
User Manual BDL5545ET
Position