2. PARTS AND FUNCTIONS
2.1. FRONT VIEW
1.
Ambient light sensor
x Detects the ambient lighting condition around the display and the image brightness will automatically adjust
when "LIGHT SENSOR" is set to "ON" in the OSD menu.
2. Remote control sensor
x Receives command signals from the remote control unit.
3. LCD power status indicator
x Indicates the operating status of the display:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters DPMS mode
- When SCHEDULE is enabled, the light blinks green and red
- If the indicator blinks red that a failure has been detected
- Off when the main power of the display is turned off
4. OPS power status indicator
x Indicates the operating status of the OPS (Open Pluggable Specification) module
- Lights green when the OPS is turned on
- Off when the main power of the OPS is turned off
13
User Manual BDL5545ET