Philips BDL5545ET/00 User Manual page 42

User Manual BDL5545ET
Select PC source
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between OPS, External, and Auto.
Touch screen function
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between Enable and Disable.
NOTE: The functions listed below will be changed or grayed out when the Touch screen function is
enabled.
(1) Zoom mode - Grayed out and set to Full
(2) Custom zoom - Grayed out
(3) PIP – Only Off and PIP are selectable. All other items will be grayed out
(4) Scan mode = Grayed out and set to Underscan except for Component input
(5) Tiling = Grayed out and set to Disable
Pixel shift = Grayed out and set to center
Configuration reset
Reset all settings in the Configuration 1 menu.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make
selection. Select Reset and press the SET button to restore settings to factory preset values. Press the
EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu.
Factory reset
Reset all settings in the Picture, Screen, Audio, PIP, Configuration 1, Configuration 2, and Advanced
option menus. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS
button to make selection. Select Reset and press the SET button to restore settings to factory preset
values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the
previous menu.
41