Portrait Mounting - Philips BDL5545ET/00 User Manual

1.4. PORTRAIT MOUNTING

Wall mounting holes
Notes:
x Metric 8 (12mm) screws are needed for wall
mounting (not included).
x The mounting interface should comply with the
UL1678 standard in North America. The mounting
means should strong enough to bear the weight
of the monitor (approx. 54.3 kg without stand).
How to use the Logo Guider for Portrait Mode
a. Adjust the logo guider to align the hole with the hole on
the short front bezel
b. Peel off the protective paper from the back side of the
logo.
c. Make sure that the logo is aligned with the short front
bezel. Press the logo to the short front bezel firmly and
repeatedly.
d. Remove the film
How to remove the logo
Note: When installing the monitor on the wall, please consult a professional technician for proper installing. The
manufacturer accepts no liability for installations not performed by a professional technician.
Note: The remote control sensor should be
on the lower side when rotating your monitor.
10
User Manual BDL5545ET