Table of Contents
Advertisement
6.2
START UP
6.2.1
INSTALLING THE MONITOR DRIVER
The built-in VESA DDC2B feature in Philips Monitors supports Plug &
Play requirements for Windows® 95/98/2000/Me/XP. This information
file (.inf) should be installed in order that your Philips monitor can be
enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/XP
and the Plug & Play application can be activated. The installation
procedure based on Windows® '95 OEM Release 2, 98, Me, XP and
2000 is specified as follows.
For Windows® 95
1 Start Windows® '95.
2 Click on the 'Start' button.
3 Select 'Settings', then click on 'Control Panel'.
4 Double click on the 'Display' icon.
5 Select the 'Settings' tab, then click on 'Advanced...'.
6 Select the 'Monitor' button.
7 Select 'Change...', then click on 'Have Disk...'.
8 Click on the 'Browse...' button, select the appropriate drive F:
(CD-ROM Drive).
9 Click on the 'OK' button.
10 Click on the 'OK' button, then select your monitor model.
11 Click on the 'OK' button.
12 Click on the 'Close' button.
For Windows® 98
1 Start Windows® 98.
2 Click on the 'Start' button.
3 Select 'Settings', then click on 'Control Panel'.
4 Double click on the 'Display' icon.
5 Select the 'Settings' tab, then click on 'Advanced...'.
6 Select the 'Monitor' button,
7 Select 'Change...', then click on 'Next'.
8 Select 'Display a list of all the drivers in a specific location, so you can
choose the driver you want.'
9 Click on 'Next', then click on 'Have Disk...'.
10 Click on the 'Browse...' button, select the appropriate drive F:
(CD-ROM Drive).
11 Click on the 'OK' button.
12 Click on the 'OK' button, then select your monitor model.
13 Click on the 'Next' button.
14 Click on the 'Finish' button, then the 'Close' button.
19
User Manual 190S6FGT
Advertisement
Table of Contents
