Avaya one-X Application Notes page 5

4.1. Configure Station for Avaya one-X Communicator
Use the add station n command, where n is an available extension in the dial-plan. To create a
station to be used by Avaya one-X Communicator, the following information should be
provided:
• Type: The IP Telephone type that will be emulated. In this compliance testing, the type
was set to 9640.
• Security Code: Password used by Avaya one-X Communicator to log in.
• Port: Set to X to administer the station without hardware.
• IP SoftPhone?: y
add station 60011
Extension: 60011
Type: 9640
Port: X
Name: 1XC User 1
STATION OPTIONS
Loss Group: 19
Speakerphone: 2-way
Display Language: english
Survivable GK Node Name:
Survivable COR: internal
Survivable Trunk Dest? y
4.2. Configure IP Codec Set
The following screen shows the codec set configuration that was used during the test. To
configure the codec set, use the change ip-codec-set n command, where n is the IP codec set
used by Avaya one-X Communicator. In this compliance testing, the G.722-64K and G.711 mu-
law codecs were used.
change ip-codec-set 1
Codec Set: 1
Audio Silence
Codec Suppression
1: G.722-64K
2: G.711MU
3:
4:
5:
6:
7:
JC; Reviewed:
SPOC 3/9/2010
STATION
Coverage Path 1: 8
Coverage Path 2:
Hunt-to Station:
Personalized Ringing Pattern: 1
IP Codec Set
Frames Packet
Per Pkt Size(ms)
2
n 2
Solution & Interoperability Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
Lock Messages? n
Security Code: 12345
Time of Day Lock Table:
Message Lamp Ext: 60011
Mute Button Enabled? y
Button Modules: 0
Media Complex Ext:
IP SoftPhone? y
IP Video Softphone? n
Customizable Labels? y
20
20
Page 1 of 5
BCC: 0
TN: 1
COR: 1
COS: 1
Page 1 of 2
5 of 12
P210A-1XC