Cutter Adjustment - Pitney Bowes DL400 Operator's Manual

1-6 | DL400 Letter Opener

Cutter Adjustment

The cutter on the DL400 can be adjusted to accommodate different mail types, allowing for a deeper
or shallower cut than what the cutter adjust lever provides.
Adjusting the Cutter Depth
1. Remove the nip assembly (see the
2. Reference the above figure and make adjustments as described below:
a. For a deeper cut - push the release button and with a flat head screwdriver, turn the cutter
adjust cam clockwise one notch to increase the cut by .002".
b. For a shallower cut - push the release button and with a flat head screwdriver, turn the
cutter adjust cam counterclockwise one notch to decrease the cut by .002".
3. Replace the nip assembly.
SV60614 RevA | Operator Guide
Nip Arm Removal/Installation
Figure 1.4
in this manual previously).
Cutter Adjust Cam
Release Button