Table of Contents
Advertisement
Reset
When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
When the unit is reset, all the settings remain
unchanged.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A)
4
Replace the fuse.
Tip
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
10 Product
information
Note
Product information is subject to change without
prior notice.
General
Power supply
12 V DC (11 V - 16 V),
negative ground
Fuse
15 A
Suitable speaker
4 - 8
impedance
Maximum power
50 W x 4 channels
output
Continuous power
24 W x 4 channels
output
(4
Pre-Amp output
2.0 V ( CD play mode;
voltage
1 kHz, 0 dB, 10 k
Subwoofer output
2.0 V (CD play mode,
voltage
61 Hz, 0 dB, 10 k
Aux-in level
Dimensions
247 x 190 x 155 mm
(W x H x D)
Weight (main unit) 2.4 kg
Disc player
System
Frequency response
Signal/noise ratio
Total harmonic distortion Less than 1%
Channel separation
Video signal format
Video output
10% T.H.D.)
load)
load)
500 mV
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
>55dB
NTSC only
1 +/- 0.2V
EN
29
Advertisement
Table of Contents
