Listen to other devices
You can connect an external audio/video device
to the unit.
Connect the car audio to the device with
the supplied AV cable.
Touch the upper left corner to display the
Operated the connected the device (see
the instructions manual of the device).
If you connected the system to other audio
device through the REAR OUT L/R connector
(see "Connect wires" section), touch [AV-IN2]
to listen to that device.
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or
When the unit is reset, all the settings remain
Remove the unit
To repair, replace fuse, or replace the unit
with another car audio, remove it from the
Take off the trim plate.
Screw off the four (4) screws on the
left/right side of the unit.
Pull the unit out from the dashboard.