8 Adjust system
settings
Set PIN code
You can set a password for bluetooth
connection.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [PIN
CODE] is displayed.
3
Press
to confirm selection.
4
Turn and then press to enter a digit.
5
Repeat step 4 to enter other three digits.
Set bluetooth connection
You can set whether the set connects to last
bluetooth device automatically.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [AUTO
ON] or [AUTO OFF] is displayed.
•
[AUTO ON]: The unit connects to
last bluetooth device automatically.
•
[AUTO OFF]: does not connect
automatically
3
Press
to confirm selection.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU/DISP for seconds.
2
Turn to select a setting:
[BKO 10 S] : Turn off the screen
•
automatically 10 seconds after last
operation.
22
EN
[BKO 20 S] : Turn off the screen
•
automatically 20 seconds after last
operation.
[BKO OFF] : Never turn off the
•
screen.
3
Press
to confirm.
Turn demo mode on/off
When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [DEMO]
is displayed.
The screen shows current Demo
»
mode setting.
3
Turn to select a setting:
•
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
•
mode.
4
Press
to confirm.
Change button backlight
color
You can change button backlight color from
blue to red or vice versa.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [KEY
BLUE] or [KEY RED] is displayed.
3
Turn to select a setting:
•
[KEY BLUE]: Backlight turns blue.
[KEY RED]: Backlight turns red.
•
Select start volume
Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
3
Turn to select a setting:
[V - LAST] : Each time you turn on
•
the unit, the volume remains from its
previous use.
[V - ADJ] : Each time you turn on the
•
unit, the volume is at the preset level.
4
Press
to confirm.
Store preset volume
You can turn on the unit at a preset volume.
1
Select
2
Press MENU/DISP for seconds.
3
Press or repeatedly to until [A-VOL]
is displayed.
4
Turn to select a value: 0 - 47.
5
Press
to confirm.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3
Rotate to select a setting:
•
[BEEP ON]: Turn on the beep sound.
[BEEP OFF]: Turn off the beep sound.
•
4
Press
to confirm.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
•
If any special characters are present in the MP track
name or album name, it may not display correctly on
the screen because these characters are not supported.
•
Some WMA is protected by Digital Rights Management
(DRM), it cannot be played on the unit.
•
Folders/files exceed the supported limit of the unit are
not displayed or played.
1
Press MENU/DISP for seconds.
2
Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3
Turn to select a setting:
•
[ROLL ON] (scroll on): Auto scroll
during play.
[ROLL OFF] (scroll off): No auto
•
scroll display.
4
Press
to confirm.
Reset
You can reset the unit to its default setting.
1
Detach the front panel (see 'Detach the
front panel' on page 24).
2
Press the reset button by using a ball-point
pen or a similar tool.
»
Preset adjustments such as preset
channels and sound adjustments are
erased.
EN
2