Set up for weak reception
When the current reception gets poor, the
product can automatically switch the source or
mute the speakers according to your setup.
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
repeatedly until [DAB
Press
/
WEAK] scrolls.
3
Rotate
to select an option, and then
press
to confirm.
•
[WEAK MUTE]: Mute the speakers
•
[WEAK TO FM]: Switch the source
to an FM radio station with strong
reception that broadcasts the same
program
Use the DRC (Dynamic
Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press and hold
to access the system menu.
» [DAB SCAN] is displayed.
2
Press
/
repeatedly until one of the
following options is displayed.
•
[DRC OFF]: No compensation applied.
[DRC LOW]: Medium compensation
•
applied.
[DRC HIGH]: Maximum
•
compensation applied.
3
Rotate
to select an option.
Disable the DAB reception
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
Press
/
repeatedly until
[ANTENNA OFF] or [ANTENNA 12V]
is displayed.
to access the system
to access the system
3
Rotate
to select an option, and then
press
to confirm.
[ANTENNA OFF]: Disable the DAB
•
reception.
[ANTENNA 12V]: Enable the DAB
•
reception.
Reset the DAB tuner
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
Press
/
repeatedly until
[DAB RESET] is displayed.
•
To clear the list of detected and
programmed stations, press
confirm.
•
To exit the system menu, press .
Remove invalid stations
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
repeatedly until [PRUNE] is
Press
/
displayed.
•
To remove invalid stations from the list
of scanned stations, press
•
To exit the system menu, press .
Check the current version of
DAB firmware
1
Press and hold
menu.
» [DAB SCAN] is displayed.
2
Press
/
repeatedly until
[SW VERSION] is displayed, and then
press
.
» The current version of DAB firmware
is displayed.
to access the system
to
to access the system
.
to access the system
EN
17