Table of Contents
Advertisement
9 Others
Listen to other devices
You can connect an external audio/video device
to the unit.
1
Connect the car audio to the device with
the supplied AV cable.
2
Touch the upper left corner to display the
main menu.
3
Touch [AV-IN1].
4
Operated the connected the device (see
the instructions manual of the device).
Tip
If you connected the system to other audio
device through the REAR OUT L/R connector
(see "Connect wires" section), touch [AV-IN2]
to listen to that device.
Reset
When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
AV IN
When the unit is reset, all the settings remain
unchanged.
Remove the unit
To repair, replace fuse, or replace the unit
with another car audio, remove it from the
dashboard.
1
Take off the trim plate.
Tip
EN
31
Advertisement
Table of Contents
