Advertisement
If you encounter detection issues, the connector farthest from the CPU (A) may be more
successful
If you are using a third-party (add-in card) video card, place it in the PCIe connector
closest to CPU (F)
Installation steps for Intel® Optane™ SSD 900P Series add-in card
1. Find the proper PCIe 3.0 connector. Remove the screw and shield from your chassis
2. Attach the SSD to the proper size I/O shield for your chassis
3. Insert the SSD
4. Replace the chassis screw in the shield to hold the SSD in place
See your chassis manual for more detailed instructions.
Installation steps for the Intel® Optane™ SSD 900P Series 2.5-inch U.2 drive
1. Mount the SSD in the chassis using screws to hold the SSD securely
2. Connect the cable to the U.2 SSD connector (SFF 8639)
3. Depending on the cable that came in your box at purchase, either connect the:
o
M.2 card in the PCIe supported M.2 motherboard connector
o
SFF 8643 to your PCIe supported motherboard connector
4. Connect SATA power to the connector on the cable
5. See your chassis manual for more detailed instructions.
M.2
SFF 8643
Advertisement
