Specifications - Tanita WB-100A Instruction Manual

Specifications

TYPE
Measurement System
Weight Measurement
Maxmum Capacity/Minmum Graduation
Input Items Height
Weight
Output Items Display
Height
BMI
Display
Size Platform
Cord Length
Display
Output Data Interface
Power Source
Power Consumption
Temperature Range of usage
Weight of Equipment
Rated Power
Battery Life
USA and Canada
Federal Communications Commission and Canadian ICES Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Canadian
ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Tanita Corporation
may void the user's authority to operate the equipment.
14-2,1-chome,Maeno-cho,Itabashi-ku
Tokyo,Japan
Tel:(03)3968-2123 / (03)3968-7048 Fax:(03)3967-3766
2625 South Clearbrook Drive Unit 301-303 3/F Wing On Plaza,
Arlington Heights, 62 Mody Road, Tsimshatsui East,
Illinois 60005 U.S.A. Kowloon, Hong Kong
Toll Free : (800) 826-4828 Tel : +852-2838-7111
Tel : 847-640-9241 Fax : +852-2838-8667
Fax : 847-640-9261
http : //www.tanita.com
WB-100A WB-110A
Strain Gauge Load Cell
200kg/0.1kg (440lb/0.2lb) 270kg/0.1kg (600lb/0.2lb)
90~249cm/1cm increments (2ft 11.5in~8ft 2in)
200kg/0.1kg increments 270kg/0.1kg increments
(440lb/0.2lb increments) (600lb/0.2lb increments)
90~249cm/1cm increments (2ft 11.5in~8ft 2in)
0.1 increments
159 209 56mm (6 1/4 8 1/4 2 1/4in)
301 336 80mm (11 7/8 13 1/4 7 7/8in)
2m(6ft)
Upper 5Digits and Lower 4Digits LCD
Height of numerals 25mm (1in)
RS-232C (D-sub 9pins Male Connector)
AC Adapter (included) Center Minus
0.3W max
0ºC/+35ºC (32ºF/95ºF)
5.1kg (11.3lb) (except battery)
DC9V 300mA (LR6•AA Alkaline Battery 6 not included)
approximately 100 hours of continuous use when using LR6 (AA Alkaline battery)
Dresdener Strasse 25 The Barn, Philpots Close, Villa Labrouste
D-71065 Sindelfingen, Yiewsley, Middlesex, 68 Boulevard Bourdon,
Germany UB7 7RY,
92200 Neuilly-Sur-Seine,
Tel : 07031-6189-6 United Kingdom France
Fax : 07031-6189-71 Tel : +44-1895-438577 Tel : 01 55 24 99 99
Fax : +44-1895-438511 Fax : 01 55 24 98 68
WB1007001(1)
BALANCE ÉLECTRONIQUE
WB-100A/WB-110A
VERSION AVEC TÉLÉAFFICHAGE
CLASS
NTEP APPROUVÉ
MODE D'EMPLOI
Veuillez conserver ce mode d'emploi dans
un endroit commode de manière qu'il soit
facilement accessible en cas de besoin.
N'utilisez l'appareil qu'après avoir pris connais-
sance du contenu du mode d'emploi.