Advertisement
Read this Instruction Manual carefully and keep it for future reference.
Fig.2
Turn the scale over and remove the battery cover by releasing the latch, (see fig.2.1) install 4 pieces of new "R6P" or "AA" type Alkaline battery (included) with correct polarity as indicated (see fig.2.2).
Note: If "Lo"message appears in display when attempting to weigh, replace the batteries. "Lo" will not appear if battery voltage is too low.
UK Only: To select st/lb move switch underneath the unit to "st/lb"
The scale should be used on a hard even surface for accurate weighing. If surface is carpeted, it is recommended to place masonite under the scale.
Use the Set button to activate the unit.
Personal Key numbers store your personal data.
Use Up/Down buttons to select height. Press Set.
Tap the personal key with your toe. The display will show personal number (fig.3.1)
Fig.3.1
Wait for the display to show "0.0" fig.3.1, then step on the scale (fig.3.3).
Fig.3.2 & 3.3
Current reading in upper display and BMI reading in under display.
Note:
For weighing accuracy
This scale is a precision instrument and very sensitive to body movement. For best accuracy, step on the scale gently, relax your body and stand still. It is normal for your weight to vary during the day. Slight changes in your weight are generally normal.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the HD-325 that isn't answered in the manual? Leave your question here.