Use And Care; Before Drying; Energy Saving Tips; Helps And Hints - ALLIANCE FDE3TRGS301NW10 Use And Care Manual

Before Drying

Energy Saving Tips

• Make sure the lint filter is always clean.
• Do not overload the dryer.
• Do not overdry items.
• Remove items to be ironed while still damp.
• Large loads of similar fabrics dry the most
efficiently. However, dry permanent press in
smaller loads to prevent wrinkling.
• Use the correct cycle for the type of fabric being
dried.
• Locate your dryer so the exhaust duct is as short
and straight as possible.
• Do not open the door during the drying cycle.
• Plan to do your laundry on low humidity days;
your clothes will dry faster.
• Dry multiple loads of clothes one right after
another so dryer interior does not have to be
reheated for each load.
511249

Use and Care

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Helps and Hints

WARNING
To reduce the risk of fire, explosion,
serious injury or death, clothes which
have traces of any flammable substances
such as cooking oil, machine oil,
flammable chemicals, thinner, etc. must
not be put into the dryer.
• The necessary suggestions and directions for
installation and proper exhausting are given in
the INSTALLATION INSTRUCTIONS which
are included with the dryer.
• Static electricity may cause garments of synthetic
fibers (as in lingerie) to cling together, especially
if they are overdried. The use of a liquid fabric
softener in the rinse water of the washer, or a
fabric softener sheet in the dryer, will soften
clothes and reduce static electricity.
• Do not wash or dry clothes that shed lint in the
same load with permanent press or knit garments.
• Remove permanent press loads immediately after
dryer stops.
• Follow the care labels on FLAME
RETARDANT, SCOTCH-GUARD™, etc.,
garments for proper washing and drying.
• If loads should be damp for ironing, turn timer
knob to the ENERGY SAVER setting, marked
with a dot ( • ) or circle (O), in Automatic or Time
Dry cycles.
W131
7