Sort; Load - ALLIANCE FDE3TRGS301NW10 Use And Care Manual

Use and Care

Sort

If you have correctly sorted the items for washing,
they should be properly sorted for drying too.
Separate:
Separate:
Separate:
Figure 1
Towels, flannels, chenille, cottons, rugs, etc., shed lint.
Corduroys, knits (including socks), permanent press,
and synthetics attract lint.
In any kind of drying, lightweight fabrics will dry
faster than heavyweight fabrics. If mixed loads are
dried together (such as sheets and towels), remove the
lighter weight fabrics when they are dry to prevent
overdrying and wrinkling. The best method is to dry
clothes which require the same time and temperature
in the same load.
8
Lights
Darks
Lint Shedding
Fabric
Lint Receiving
Fabric
No Heat Items
Low Heat Items
High Heat Items
D250IE0A
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Load

Do not overload your dryer. Bulk, not weight,
determines the load size. If the dryer is overloaded, it
could cause discoloration or permanent heat damage to
the load. There should be space in the dryer for the
clothes to tumble freely. This helps to reduce wrinkles.
Large and small pieces together make up loads which
will tumble well. Permanent press loads should be
smaller to provide room for tumbling. Proper tumbling
allows for fewer wrinkles. The following illustrations
show the ideal load sizes for fabrics. The average load
will fill the cylinder one third to half full when wet.
CYLINDER WITH WET
COTTONS AND LINENS
Figure 2
CYLINDER WITH WET
PERMANENT PRESS
Figure 3
A load can be too small. Just a few small pieces will
not tumble properly. They will take longer to dry and
they may be wrinkled. For small loads, add a couple of
large towels or non lint shedding items to aid in
tumbling.
D665I
D665I
D666I
D666I
511249