IBM Netfinity FASt T500 User Reference page 54

3 Locate the empty DIMM socket in front of the populated one that contains the standard
256 MB cache memory module. Make sure that both DIMM latches are open to their
outermost position before inserting the new memory module.
Upgrade 256 MB
cache module
4 Carefully insert the DIMM into the empty socket, making sure that the left and right
edges of the module slide inside the grooves in the DIMM latches. As you push the
DIMM into place, the DIMM latches slowly close around the new module.
5 Once the DIMM is fully seated in the socket, press firmly inward on the left and right
DIMM latches until they lock and secure the DIMM into place.
6 Install the top cover that you removed in
Install the controller back in the controller unit by reversing the procedure in
page 32.
34 IBM Netfinity FAStT500 RAID Controller Enclosure Unit User's Reference
DIMM latches in open position
DIMM latches in closed position
Step 2 on page
Standard 256 MB
cache module
33.
Step 1 on