Important:
Discard transceivers in accordance with the proper laws and regulations.
Console port pin assignments
The following section describes the console port pin assignments for the RJ-45 connectors in the
Avaya Virtual Services Platform 8000 Series. The Console port and Management port both use
RJ-45 connectors.
Table 9: Console port pin assignments
Connector
Note:
The Table 15 — Console port pin assignments shows only the console signalling.
AC power supply
Installing an AC power supply
Important:
Avaya does not support installing a combination of AC-input and DC-input power supplies in the
same chassis.
The Avaya Virtual Services Platform 8000 Series supports two field-replaceable 800W power
supplies. One comes with the switch and you can install a second power supply to provide
redundancy and load sharing.
November 2016
Pin Number
Signal
1
Ready to send (RTS) — optional
2
Data terminal ready (DTR) — optional, can swap or link with pin
8
3
Transmit data (TXD) — mandatory
4
Carrier detect (DCD) — optional
5
Ground (GND) — mandatory
6
Receive data (RXD) — mandatory
7
Data set ready (DSR) — optional
8
Clear to send (CTS) — optional, can swap or link with pin 1
Installing the Avaya VSP 8000 Series
Comments on this document? infodev@avaya.com
Console port pin assignments
71