Bosch MOT 240 Operating Instructions Manual page 79

Example:
a) to be stored or overwritten:
- Select the engine type to be memorized (see section 4.6.1/
4.6.2 and 4.6.3) till all parameters appear completely (in the
status line).
- With softkeys F5/6 select the memory field which must be
overwritten by the engine type inscribed in the status line.
- Press the softkey F2 „memorization". The engine type memorized
is replaced by the new type.
b)adoption or reading of the memory in the status line:
- Select the memory field of the engine type which must be taken
over in the status line.
- Press the softkey F1 "reading". The engine type is taken over
in the status line.
79