Technical Data - Wallbe Driving eMobility Eco 2.0 Instruction Manual

Instruction Manual

11 TECHNICAL DATA

POWER CLASS 3,7 kW
Construction type
Number of charging
points
Charging capacity
Dimensions
wallbox
(H x W x D)
Weight
wallbox
Dimensions
charging column
(H x B x T)
Weight
charging column
Storage temperature
Operating temperature
(compliant with german
calibration law)
Operating temperature
(not compliant with ger-
man calibration law)
Relative humidity
Protection degree
Charging socket / char-
ging cable
Firmly attached charging
cable
Power contactor
Control fuse
Integrated
safety devices
RCD
(must be installed in the
sub-distribution)
Circuit breaker
Authorization
Housing lockable
Energy meter
Protocols
Interfaces
Protection class
Driving eMobility
Wallbox or charging column
1
16 A, 230 V, 1-phase
18 x 29 x 14 cm
approx. 2,5 kg
122 x 29 x 30 cm
approx. 11 kg
-30 to +70°C
-25 to +40°C
-25 to +55°C
30 to 95% (non-condensing)
IP54
Charging socket type 2
Additionally available:
Cable type 1 or type 2
Type 1 or type 2
No
1-pole, B6
RCM-module –
DC fault current detection. 6 mA
contactor monitoring
Lock release module
Type A
0,03 A / 25 A
Not integrated
Key switch
No
No
Modbus TCP/RTU
Ethernet RJ45, RS485
1
POWER CLASS 4,6 kW
Construction type Wallbox or charging column
Number of charging
1
points
Charging capacity
20 A, 230 V, 1-phase
Dimensions 18 x 29 x 14 cm
wallbox
(H x W x D)
Weight approx. 2,5 kg
wallbox
Dimensions 122 x 29 x 30 cm
charging colum
(H x B x T)
Weight
approx. 11 kg
charging column
Storage temperature
-30 to +70°C
Operating temperature -25 to +40°C
(compliant with german
calibration law)
Operating temperature
-25 to +55°C
(not compliant with ger-
man calibration law)
Relative humidity 30 to 95% ( (non-condensing)
Protection degree
IP54
Charging socket / char-
Charging socket type 2
ging cable
Additionally available:
Cable type 1 or type 2
Firmly attached charging
Type 1 or type 2
cable
Power contactor 2-pole, 25 A
Control fuse 1-pole, B6
Integrated RCM-module –
safety devices DC fault current detection. 6 mA
contactor monitoring
Lock release module
RCD Type A
(must be installed in the
0,03 A / 25 A
sub-distribution)
Circuit breaker
Not integrated
Authorization Key switch
Housing lockable No
Energy meter
No
Protocols
Modbus TCP/RTU
Interfaces Ethernet RJ45, RS485
Protection class 1
9/13