Starting The Charging Process; Ending The Charging Process - Wallbe Driving eMobility Eco 2.0 Instruction Manual

Instruction Manual
Your charging station has either a type 2 socket or a
firmly attached charging cable.
Charging station with socket:
1. Make sure that the status LED shines green.
2. Connect the charging cable to the vehicle inlet of the
electric vehicle.
3. Connect the other end of the charging cable to the
socket of the charging station.
The charging plug is automatically locked. The status
LED remains green.
Charging station with firmly attached charging cable:
1. Make sure that the status LED shines green.
2. Connect the charging cable to the vehicle inlet of the
electric vehicle.
The charging plug is automatically locked. The status
LED remains green.

4.3 Starting the charging process

1. Make sure that the charging cable is connected to
the electric vehicle and to the charging station.
2. To start charging the electric vehicle, turn the key
from position 0 to position 1.
The charging station is then activated and the
status LED flashes alternately green and blue. After
successful activation, the charging process starts
automatically. The status LED now shines blue.

4.4 Ending the charging process

Note: In case of power failure, the charging plug is au-
tomatically unlocked by the lock release module.
Charging station with socket:
1. When the desired state of charge has been reached,
you can stop the charging process, either by opening
the central locking of your vehicle or turning the key
to position 0 (12 o'clock position) at the charging sta-
tion.
Note: When the vehicle is fully charged, the vehicle
will automatically stop charging.
2. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle's instruction manual.
3. Then disconnect the charging cable from the char-
Driving eMobility
ging station.
4. Stow the charging cable carefully back in your vehic-
le.
Charging station with firmly attached charging cable:
1. When the desired state of charge has been reached,
you can stop the charging process, either by opening
the central locking of your vehicle or turning the key
to position 0 (12 o'clock position) at the charging sta-
tion.
Note: When the vehicle is fully charged, the vehicle
will automatically stop charging.
2. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle's instruction manual.
3. Then plug the charging plug into the parking position.
5/13