Disposal; Technical Data - Wallbe Pro Plus Online M2M Instruction Manual

Instruction manual

10 DISPOSAL

Please note that this product must not be disposed
of with household waste. The product must be dispo-
sed of at a designated collection and return point for
the disposal and recycling of electrical and electronic
equipment. Observe all applicable national and local
legislation. Further information can be obtained from
your local authorities.
For safety reasons, the charging station may only be
dismantled by a qualified electrician or a wallbe® spe-
cialist partner. Ask your contact person whether he will
take charge of the disposal for you.
Driving eMobility

11 TECHNICAL DATA

POWER CLASS 11 kW
Construction type wallbox or charging column
Number of charging
2
points
Charging capacity
16 A, 400 V, 3-phase
Dimensions 56 x 56 x 22 cm
wallbox (H x W x D)
Weight approx. 18,5 kg
wallbox
Storage temperature -30 to +70°C
Operating temperature -25 to +40°C
(compliant with german
calibration law)
Operating temperature -25 to +55°C
(not compliant with ger-
man calibration law)
Relative humidity 30 to 95% (non-condensing)
Protection degree IP54
Charging socket / char-
Charging socket type 2
ging cable
Additionally available:
Cable type 1 or type 2
Firmly attached charging
Type 1 or Type 2
cable
Power contactor 4-pole, 25 A
Control fuse
1-pole, B6
Integrated RCM-module –
safety devices
DC fault current detection. 6 mA
contactor monitoring
Lock release module
RCD Type A
(must be installed in the 0,03 A / 25 A
sub-distribution)
Circuit breaker Not integrated
Authorization RFID,
App
Housing lockable Optional
Energy meter
Yes
Protocols Modbus TCP
Interfaces Ethernet RJ45
Protection class
1
9/12