Wire Feed - EWM Drive XQ Operating Instructions Manual
Wire feed unit
Hide thumbs
Also See for Drive XQ:
- Operating instructions manual (56 pages) ,
- Operating instructions manual (55 pages) ,
- Operating instructions manual (59 pages)
Table of Contents
Advertisement
5.3.3
Wire feed
Risk of injury due to moving parts!
The wire feeders are equipped with moving parts, which can trap hands, hair, clothing
or tools and thus injure persons!
•
Do not reach into rotating or moving parts or drive components!
•
Keep casing covers or protective caps closed during operation!
Risk of injury due to welding wire escaping in an unpredictable manner!
Welding wire can be conveyed at very high speeds and, if conveyed incorrectly, may
escape in an uncontrolled manner and injure persons!
•
Before mains connection, set up the complete wire guide system from the wire spool to the
welding torch!
•
Check wire guide at regular intervals!
•
Keep all casing covers or protective caps closed during operation!
099-005570-EW501
29.08.2019
Design and function
CAUTION
MIG/MAG welding
25
Advertisement
Table of Contents
Need help?
Do you have a question about the Drive XQ and is the answer not in the manual?
Questions and answers