Download  Print this page

Drum Lamp - GE GFD14 Owner's Manual & Installation Instructions

Hide thumbs


Table of Contents
Care and cleaning

Drum Lamp

NOTE: The drum lamp is not consumer replaceable on models where there is a flat cover
over an LED bulb. If this light should ever stop working, call for service.
For models that have a domed cover over the bulb secured by a screw:
Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the
dryer at the household distribution panel by removing the fuse or switching off the circuit
breaker. Reach above dryer opening from inside the drum to locate the light.
Remove the screw and the plastic cover to access the bulb. Replace with the appropriate
bulb and then reaffix the cover and screw.
Order replacement bulb WE11X26351 on-line at, by phone at 877.959.8688 during normal
business hours, or purchase appliance bulb 7C7 from your local retailer.
When the door is opened, the drum lamp automatically turns on and remains on for 2 minutes. When the door is closed,
the drum lamp will remain on for 30 seconds.
Disconnect power supply before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
- Electrical Shock Hazard
49-3000087 Rev 1


Table of Contents

  Related Manuals for GE GFD14