Keysight M9703A Series Configuration And Measurement Instructions page 6

Keysight M9703A Hardware Extension of 89600 VSA Software
3. Review and configure the
6
d. In the box below ensure that M9703A appears as the 'ADC' entry, and if you have more than
one M9703A connected - select the required unit using the drop-down list.
e. You may either use the default name or specify another name for this analyzer configuration.
f. Click OK to close the 'New Hardware Configuration' dialog.
But before closing the 'Hardware Configurations' dialog, use the Current
g.
Analyzer Configuration drop-down to select the newly created M9703A
Digitizer as the current item.
Measurement Setup Parameters.
M9703A Hardware Extension of 89600 VSA Software