Keysight M9703A Series Configuration And Measurement Instructions page 11

Measurement Setup Parameters
Range: The M9703A digitizer has two range settings: 2 V (10 dBm) and 1
V (4 dBm).
Coupling: DC
Input Impedance: 50 Ohms.
Connection: Single Ended.
The frequency measurement parameters may be configured from the MeasSetup >
Frequency menu.
Frequency:
Span: The maximum span is dependent upon the maximum sample rate
of the particular M9703A digitizer model.
ResBW: 3 MHz
Main Time Length: 1.273125 µs
Center Frequency Limits: The limits depend on which model you are
using:
Frequency Counter: Not available.
Trigger settings may be accessed via the Input > Trigger menu:
The following trigger parameters are available:
Trigger levels:
11
Digitizer
Band
Model
M9703A-SR1 0 to 390.625
MHz
M9703A-SR2 0 to 625 MHz
Model Max span
M9703A-SR1 390.625MHz
M9703A-SR2 625 MHz
Model Limits
M9703A-SR1 0 to 1.0 GHz
M9703A-SR2 0 to 1.6 GHz
Style: Free Run*, External, and Magnitude**
l
Slope: available for External and Magnitude**
l
Level: available for External and Magnitude**
l
Delay: available for External and Magnitude**
l
Center Span
195.3125 390.625
MHz MHz
312.5 MHz 625 MHz
M9703A Hardware Extension of 89600 VSA Software
Start Stop
0 390.625
MHz
0 625 MHz