Table of Contents
Advertisement
If you are using a test fixture, keep the lid
closed while power is applied to the device
under test. Safe operation requires the use
of a lid interlock.
Instrumentation and accessories shall not
be connected to humans.
Before performing any maintenance, dis-
connect the line cord and all test cables.
To maintain protection from electric shock
and fire, replacement components in mains
circuits – including the power transformer,
test leads, and input jacks – must be pur-
chased from Keysight. Standard fuses with
applicable national safety approvals may be
used if the rating and type are the same.
Other components that are not safety-
related may be purchased from other sup-
pliers as long as they are equivalent to the
original component (note that selected
parts should be purchased only through Key-
sight to maintain accuracy and functionality
of the product). If you are unsure about the
applicability of a replacement component,
call an Keysight office for information.
No operator serviceable parts inside.
Refer servicing to qualified personnel. To
prevent electrical shock do not remove
covers. For continued protection against
fire hazard, replace fuse with same type
and rating.
PRODUCT MARKINGS:
The CE mark is a registered trademark of the
European Community.
Australian Communication and Media
Authority mark to indicate regulatory com-
pliance as a registered supplier.
This symbol indicates product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also iden-
tifies the product is an Industrial Scientific
and Medical Group 1 Class A product
(CISPR 11, Clause 4).
South Korean Class A EMC Declaration. This
4
equipment is Class A suitable for pro-
fessional use and is for use in elec-
tromagnetic environments outside of the
home.
급 기 기 ( 업 무 용 방 송 통 신 기 자 재
A
) 이 기 기 는 업 무 용
급
전 자 파 적 합 기
(A
)
기 로 서 판 매 자 또 는 사 용 자 는 이 점 을 주
의 하 시 기 바 라 며 , 가 정 외 의 지 역 에 서 사
용 하 는 것 을 목 적 으 로 합 니 다
This product complies with the WEEE Dir-
ective marketing requirement. The affixed
product label (above) indicates that you
must not discard this electrical/electronic
product in domestic household waste.
Product Category: With reference to the
equipment types in the WEEE directive
Annex 1, this product is classified as "Mon-
itoring and Control instrumentation"
product. Do not dispose in domestic house-
hold waste. To return unwanted products,
contact your local Keysight office, or for
more information see
http://about.keysight.com/en/companyinfo/
environment/takeback.shtml.
This symbol indicates the instrument is
sensitive to electrostatic discharge (ESD).
ESD can damage the highly sensitive com-
ponents in your instrument. ESD damage is
most likely to occur as the module is being
installed or when cables are connected or
disconnected. Protect the circuits from ESD
damage by wearing a grounding strap that
provides a high resistance path to ground.
Alternatively, ground yourself to discharge
any built-up static charge by touching the
outer shell of any grounded instrument
chassis before touching the port con-
nectors.
This symbol on an instrument means cau-
tion, risk of danger. You should refer to the
operating instructions located in the user
documentation in all cases where the sym-
bol is marked on the instrument.
This symbol indicates the time period dur-
ing which no hazardous or toxic substance
elements are expected to leak or deteriorate
during normal use. Forty years is the expec-
ted useful life of the product.
CLEANING PRECAUTIONS:
To prevent electrical shock, disconnect
.
the Keysight Technologies instrument
from mains before cleaning. Use a dry
cloth or one slightly dampened with
water to clean the external case parts.
Do not attempt to clean internally. To
clean the connectors, use alcohol in a
well-ventilated area. Allow all residual
alcohol moisture to evaporate, and the
fumes to dissipate prior to energizing the
instrument.
Advertisement
Table of Contents
