Keysight M9703A Series Configuration And Measurement Instructions page 5

Keysight M9703A Hardware Extension of 89600 VSA Soft-
ware
The 89601B: 89600 VSA software supports the Keysight M9703A AXIe High-Speed
Digitizer. This VSA measurement hardware configuration offers broadband vector sig-
nal analyzer measurements up to 625 MHz of analysis bandwidth (model dependent).
Model
M9703A-SR1
M9703A-SR2
sion of the current software i.e. You must use the 64-bit version of the 89600 VSA software with M9703A.
Configuring the 89600 VSA software application to use the M9703A
hardware
1. Start the 64-bit version of the 89600 VSA software application.
2. Configure the M9703A digitizer as the VSA measurement input by creating an 'Analyzer Con-
figuration' that uses the M9703A digitizer as the Logical Instrument (ADC) by performing the following
steps:
M9703A Hardware Extension of 89600 VSA Software
Bandwidth
390 MHz
625 MHz
That the M9703A is not supported by the earlier 89601A VSA software, neither by the 32-bit ver-
From the menu, go to Utilities > Hardware > Configurations, and click on
a.
Add New Configuration button (
Configuration' dialog.
b. De-select 'Simulate Hardware' if it is selected.
Select the M9703A digitizer from the list of 'Possible Logical Instrument'
c.
and drag it or click on the
Keysight M9703A Hardware Extension of 89600 VSA Software
). This will open the 'New Hardware
button to add it to the 'Configuration' box.
5