Present Time Setting; Setting Of Power Failure Compensation Function - Haier Super Match Series Service Manual

Operation

Present time setting

The timing is based on the real time. Thus, the real time should be regulated in advance.
The clock regulation steps are as follows:

Setting of power failure compensation function

When SW1-6 on PCB of wire controller is OFF, it will be in power failure compensation. If the SW1-6 is ON, it has no
compensation function.
When the power is on after blackout, the unit will return to the former state if compensation function is set. Otherwise, it
will stop. When restarting the unit, press "ON/OFF" switch on wired controller.
Super Match
1.Press "CLOCK" switch
"CLOCK" flickers, and the time displayed is the real time.
2.Press " " and " " to regulate the time.
The time increases a minute each time you press "
The time decreases a minute each time you press "
3.Press "SET" switch. The setting is achieved.
Notes
If not in timing, the screen displays the real time.
If in timing, the screen displays the timing time.
If you want to know the real time, go to the first step.
141
" switch.
" switch.