Operation - Graco SDM8 Series Instructions Manual

Operation

Operation
1. Open nozzle.
2. IF THE METER IS ALREADY AWAKE:
On the Main Menu screen, select
DISPENSE.
IF THE METER IS NOT AWAKE:
Wake up the metered dispense valve by
pressing any button on the metered
dispense valve key pad.
3. The Dispense screen displays.
4. Select RESET and then press ENTER to
display the volume totalizer and reset the
previous dispense.
NOTE: If RESET is not
selected/entered, the meter will continue
with the previous dispense.
5. Pull the trigger to dispense fluid.
16
6. When the desired amount of fluid has
been dispensed, release the trigger to
stop the fluid flow.
F . 22
IG
7. (OPTIONAL) Select RESET and press
ENTER to reset the totalizer for the next
metered dispense (if desired).
8. (OPTIONAL) Select MENU to return to
the main menu.
9. Close nozzle when you have completed
dispensing fluid.
3A6711C