Advertisement
Quick Links
Advertisement
Related Manuals for Ltech WiFi-104
Summary of Contents for Ltech WiFi-104
- Page 1 Model: WiFi-104 www.ltech-led.com...
-
Page 2: Configuration Diagram
-30℃~55℃ Byte: Android Edition (919K); after initialization. Dimension: L175×W44×H30(mm) iOS Edition (2.9MB) LINK: The indicator light stays lit when the mobile device connects to WiFi-104, and turns off when disconnect. Package Size: L178×W48×H33(mm) Language: English Category: Appliance Weight (G.W.): RX/TX:... - Page 3 Use code switch to set the controller's SSID number, WIFI-104-SSID-X, X stands for a certain No. ranging 4.1. WiFi-104 Software Installation: from 0-F, totally 16 options. which means our product could set 16 isolated LAN in the same area. WiFi-104 Scan QR Code to download the APP via mobile phone.
- Page 4 Zone function Disconnect to Change the background Attn: In this connection mode, to avoid the mobile device automatically connect to WiFi-104 after the setting WiFi-104 controller Connect to the additional router TP-LINK1 has completed, please click on the connected WiFi-104 which under the mobile device "WiFi setting". and at the message box please click "Ignore the network,"...
- Page 5 RGBW value LED type accordingly (zones are nameable). White Brightness value value [Attn]: Wifi-104 itself is defaulted as zone NO.1, connecting lights is optional, slave control will be zone NO.1 if not connected. Color bar Zone Zone selection Group selection...
- Page 6 WiFi-104 LED Controller WiFi-104 LED Controller B. Learning ID: Short press "ID learning button" on the receiver, the running light keeps on, select the zone No. on the App and touch the color screen for 2s-3s. The buzzer long beep (meanwhile the running light on the Group selection receiver back to flash state), ID matched.
- Page 7 Play the scenes Scene background [Attn]: Direct connection of using wifi-104 as a router, exit the App after the SSID name and the password Click to change the scene changed, reconnect the WiFi-104 on the mobile devices. background For extra router connection, just press “...
- Page 8 7.1 Connection Between Zone Receiver to LEDs ( Same as WiFi-104 ) M12 Remote Attn]: Wifi-104 itself is defaulted as zone NO.1, connecting lights is optional, slave control will be zone NO.1, Working Voltage: 3Vdc (CR2032 button battery) if not connected.
- Page 9 WiFi-104 LED Controller WiFi-104 LED Controller 7.2 Direct Connection of Using WiFi-104 as Router 7.3 Extra Router Connection [Attn] unlimited zone receiver R4-5A/R4-CC can be installed for each zone within effective range.
- Page 10 WiFi-104 LED Controller WiFi-104 LED Controller 7.4 Remote Distance Reference 8. Attention [Attn]: The following distance figures is measured in spacious environment. Please refer to the actual test 8.1 The product shall be installed and serviced by the qualified person.
Need help?
Do you have a question about the WiFi-104 and is the answer not in the manual?
Questions and answers