Radio - JVC KD-R498 Instruction Manual

RADIO

For key layout on the faceplate, see page 3 or page 4.
Search for a station
1 Press source button repeatedly to select FM, AM, SW1 or SW2.
2 Press (or press
station automatically.
(or)
Press and hold (or press and hold
control) until "M" flashes, then press repeatedly to search for a
station manually.
• "ST" or "STEREO" lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the following button until "PRESET MODE" flashes.
KD-R498/KD-R496/KD-R491:
KD-R492:
2
Perform 'select an item ( 3 or 4)' operation to select a preset
number.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Perform 'select an item ( 3 or 4)' operation to select a preset
number.
on the remote control) to search for a
on the remote
Volume knob
Other settings
1 Press and hold .
2 Perform 'select an item ( 3 or 4)' operation to select an item
(see the following table).
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
TUNER SETTING
RADIO TIMER Turns on the radio at a specific time regardless of the current source.
1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be turned
on.
2 FM/AM/SW1/SW2: Select the band.
3 01 to 18 (for FM)/01 to 06 (for AM/SW1/SW2): Select the preset station.
4 Set the activation day *
"M" lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC]/[SW1 SRC]/[SW2 SRC] in
[SOURCE SELECT] after Radio Timer for AM/SW1/SW2 is selected.
( 6)
SSM SSM 01–06/SSM 07–12/SSM 13–18: Automatically presets up to 18
stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07–12/SSM 13–18 to store the following 12 stations.
LOCAL SEEK ON: Searches only AM/SW1/SW2 stations with good reception. ;
OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
* 1
Selectable only when [ONCE] or [WEEKLY] is selected in step
.
Default: XX
1
and time.
1
.
ENGLISH
7