Getting Started; Cancel The Demonstration; Set The Clock And Date - JVC KD-R498 Instruction Manual

BASICS
Remote control (RM-RK52)
Aim the remote control directly to the remote sensor on the
unit. ( 3 or 4)
Pull out the insulation
sheet when using for
the first time.
How to replace the battery
To On the remote control
Adjust the Press
volume • Press and hold
increase the volume to 15.
Press to mute the sound or pause
playback.
• Press again to cancel. The volume
level returns to the previous level
before muting or pause.
Select a source Press SOURCE repeatedly.
or .
to continuously

GETTING STARTED

For key layout on the faceplate, see page 3 or page 4.
1

Cancel the demonstration

When you turn on the power for the first time (or after you reset the unit), the display
shows:
KD-R498/KD-R496/KD-R491:
"CANCEL DEMO" "PRESS ENTER"
1
Press .
[YES] is selected for the initial setup.
2
Press again.
"DEMO OFF" appears.
KD-R492:
"CANCEL DEMO" "PRESS" "VOLUME KNOB"
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press and hold .
2
Perform 'select an item ( 3 or 4)' operation to select [CLOCK].
3
Perform 'select an item ( 3 or 4)' operation to adjust the clock.
[CLOCK ADJUST] set the hour and minute
4
Perform 'select an item ( 3 or 4)' operation to set the date.
[DATE SET] set the day, month and year
5
Press to exit.
To return to the previous setting item, press
[CLOCK FORMAT] [12H] or [24H]
.
ENGLISH
5