Display Settings - JVC KD-R498 Instruction Manual

DISPLAY SETTINGS

Zone identification for brightness setting
KD-R498/
KD-R496/
KD-R491
KD-R492
Zone identification for color setting
Symbolic button
KD-R498/
KD-R496/
KD-R491
1
Press and hold .
2
Perform 'select an item ( 3 or 4)' operation to select an item
(see the following table).
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
14
ENGLISH
(Symbolic button)
.
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Perform 'select an item ( 3 or 4)' operation to adjust the
[ON] time.
2 Perform 'select an item ( 3 or 4)' operation to adjust the
[OFF] time.
(Default: [ON]: PM6:00 ; [OFF]: AM6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn
off or on the car headlights. *
BRIGHTNESS Set the brightness for day and night separately.
1 DAY/NIGHT: Select day or night.
2 Select a zone. (See the illustration.)
3 LEVEL 00 to LEVEL 31: Set the brightness level.
TEXT SCROLL * 2
SCROLL ONCE: Scrolls the display information once. ;
SCROLL AUTO: Repeats scrolling at 5-second intervals. ;
SCROLL OFF: Cancels.
* 1
The illumination control wire connection is required. ( 20)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
Default: XX
1