Before Installation - Fisher & Paykel RB2470BRV Installation Manual

IMPORTANT!
Ensure your product is not exposed to any heat generating products eg cooktop, oven or dishwasher.
● ●
The product must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection.
● ●
All connections for electrical power and grounding must comply with local codes and ordinances and be made by licensed personnel when required.
● ●
Avoid installation of the product/s under a ground fault circuit interrupter (GFCI).
● ●
Ensure the product is installed properly. Improper installation that results in product failure is not covered under the product warranty.
● ●
Check the installation location
Cabinetry
Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).
● ●
Ensure that the ventilation openings in the cabinetry are clear of obstruction.
● ●
Power supply connection
Ensure that there is a separate power outlet for the product.
● ●
Avoid sharing the power point with other products to prevent the product from accidentally switching off.
● ●
For power requirements, refer to the information on the serial plate.
● ●
Ensure your product is properly grounded (earthed).
● ●
Connect your product to an electrical supply with the fitted plug and lead.
● ●
We recommend to use an isolating switch that is easily accessible to the user after the product is installed.
● ●
Your product
Ensure that your product is the correct model as per your order.
● ●
Ensure that the packaging is not damaged upon delivery.
● ●
Check that the components and install kits are complete.
● ●
8
8

BEFORE INSTALLATION