Fisher & Paykel RB2470BRV Installation Manual page 25

Hanging the door panel
Open the refrigerator door.
!3
Hang the top door panel onto the height
!4
adjustment nuts (I) at the top of the
refrigerator door.
Screw the side adjustment nuts (J) onto
!5
the thread of the height adjustment
nuts to secure the door panel to the
refrigerator door.
– Do not tighten fully to allow
adjustment of the top door panel.
Align the bottom attachment
!6
brackets (K) with the screw
holes at the bottom of the
top door panel. Fasten with
cabinetry attachment screws
(L) and wood screws (M).
– Do not tighten fully to
allow adjustment of the
top door panel.
Bottom view of door
!9 INSTALL TOP DOOR PANEL (CUSTOM)
I
J
K
M
L
Adjusting the door panel
Height adjustment of the door panel
Turn the height adjustment nuts (N) with a hex key. Hold the side adjustment nuts (O) with
!7
a spanner wrench to ensure it does not rotate when turning the height adjustment nuts.
– We recommend to use a T-handle hex key so that the height adjustment nuts can be
J
turned easily without being blocked by the magnet sensor.
– If the height adjustment nuts cannot be adjusted, check the left and right clearances
of the top hanging bracket.
Side adjustment of the door panel
Loosen the side adjustment nuts (O) and move the door panel slightly sideways to adjust
!8
the side alignment.
– Hold the height adjustment nuts (N) with the hex key to ensure it does not rotate
when loosening the side adjustment nuts.
Depth adjustment of the door panel
Loosen the depth adjustment nuts (P) and move the door panel forward/backward to
!9
adjust the depth position.
Tighten the nuts fully after you are satisfied with the adjustments.
@0
Fixing the top door panel
Once you are satisfied with
@1
the adjustment, fully tighten
the screws of the bottom
attachment brackets (Q) to
secure the door panel.
Place the bracket covers
@2
on the bottom attachment
brackets (R).
SCALE 2:1
N
O
Q
R
P
23