Please note the included General Safety Notes and
the following safety notes to avoid malfunctions,
damage or physical injury:
Please read this manual carefully and use the unit
only according to this manual.
When using the tool, use safety equipment including
safety glasses and ear protection. If operating the tool
causes discomfort in any way, stop immediately and
review your method of use.
Dispose of used packaging material carefully or store
it out of the reach of children. There is a danger of
suffocation!
Persons with limited physical, sensorial or mental abilities are
not allowed to use the unit, unless they are supervised and
briefed for their safety by a qualified person.
Battery chargers are for indoors use only. Ensure that the
power supply and charger are protected against moisture at all
times.
Use metal and voltage detectors to locate concealed electric,
water or gas lines. Avoid touching live components or conduc-
tors.
Ensure that the lighting is adequate.
Ensure that the drill bit is securely fixed in the chuck. Insecure
drill bits can be ejected from the machine causing a hazard.
Ensure that the drill bit is not in contact with the workpiece
prior to starting up the tool.
Before drilling, check that there is sufficient clearance for the
drill bit under the workpiece.
Do not exert pressure on to the tool. To do so would shorten
its service life.
Drill bits get hot during operation; allow cooling prior to
handling them.
Safety Notes
17