Eva-Dts - Unicum FOODBOX LIFT TOUCH User Manual

ТМ
FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH

9.1.6 EVA-DTS

SETTING
Swap machine IDs
Zero resettable counters
Allow configuration files
Price change from USb
EVA_DTS version for audit files
Version 1.3 / December 2018
figure 21 - System [EVA-DTS]
DESCRIPTIoN
Permits swapping the fields (the vending machine
number is replaced by the Main Board serial num-
ber, and the Main Board serial number is replaced
by the vending machine number). A vending ma-
chine number is a number that is set in the settings
and which is possible to change. The Main Board
serial number is a 12-digit number, recorded into
the controller board firmware during its manufac-
turing (it's unique and can't be changed via the
vending machine menu).
ENAbLED - the zeroing of the vending machine
resettable counters after the gathering (saving)
the log files to the USB-flash drive
ALL - permits loading all configuration files
CoNf_GEN oNLY - permits loading only CONF_
GEN format from configuration files.
Permits/prohibits price changes via loading from
a USB-flash drive.
EVA-DTS format version selection for audit files.
VALUE
Disabled /
Enabled
Disabled /
Enabled
Disabled /
Enabled
6.0
6.1
Page 32