Developer Version - Siemens SIMATIC HMI SICALIS PMC 7 Equipment Manual

Developer Version

Purpose
The Developer Version of the keyboard driver contains – in comparison to the
Runtime Version included in the standard package (see page 2-13) – some
additional tools, which enable you to modify the standard key assignment to suit
customer-specific requirements.
The Developer Version is included in the standard operator panel package.
Installation Files for the Developer Version
The installation files for the Developer Version are delivered on a separate
diskette. This is not a standard part of the operator panel package. The diskette
contains the files listed in Table C-1.
Table C-1
File
Bit2Led.def
Bit2Led.exe
BitLed.bat
DefPad.exe
Install.bat
KbdTaco.dll
KbdTaco.reg
Key2Bit.def
Key2Bit.exe
KeyBit.bat
readme.txt
SiKey.reg
SiKey.sys
Simatico.def
Simatico.pad
tacob2l.tbl
tacok2b.tbl
TastDrv.reg
TastDrv.sys
SICALIS PMC 7 Operator Panel Equipment Manual
Release 09/00
Installation Files for the Developer Version
Source file for the converter Bit2Led.exe
Converter: Assignment of Bit –> LED (LED = lamp control)
Batch file to start the converter Bit2Led.exe
Converter for key codes
Batch file to install the required drivers and tables
Mapping table for key codes, which are not used by the standard
keyboards
Registry file for the mapping table KbdTaco.dll
Source file for the converter Key2Bit.exe
Converter: Assignment of Key –> Bit
Batch file to start the converter Key2Bit.exe
Text file with general information
Registry entry for the driver software SiKey.sys
Driver software
Source file for the converter DefPad.exe
Key assignment file
Binary table: Assignment of Bit –> LED (LED = lamp control)
Binary table: Assignment of Key –> Bit
Registry entry for the keyboard driver TastDrv.sys
Keyboard driver
Function
C
C-1