Table of Contents
Advertisement
FIRMWARE UPGRADE
A
Recommend
Copy 'system_roik10' folder to USB Memory root and insert to USB1 Port.
Select Upgrade Menu, it will start upgrade
*'/usb disk/system_roik10' Folder have 'update.img' file
* If there is no update file, "Upgrade Device" menu is not show
※ After firmware update, be sure to perform factory reset to apply the firmware.
※ Update Time will 3~4 min, after first time booting take 3~4 min.
※ USB format type = FAT32 / use on USB1 Port only.
B
Copy 'system_roik10' folder to USB Memory root and insert to USB1.
Push hold "Recovery Key" and turn on (re-connect power cable), it will start upgrade
*'/usb disk/system_roik10' Folder have 'update.img' file
※ After firmware update, be sure to perform factory reset to apply the firmware.
※ Update Time will 3~4 min, after first time booting take 3~4 min.
※ USB format type = FAT32 / use on USB1 Port only.
Recovery Key
USB 2.0
Advertisement
Table of Contents
