Internet telephone service, properly configure the boot up or firmware upgrade. You may corrupt firmware im- GXW42XX V2 series to use that service, and pe- ages and cause the unit to malfunction. riodically test your configuration to confirm that it PACKAGE CONTENTS works as You expect.
V2 and connect the other end of the Ethernet cable to an machines and legacy PBX systems. The GXW42XX V2 se- uplink port (a router, a modem, etc.). ries includes 16/24/32/48 FXS ports, a Gigabit network port 3.
Page 4
RJ11 patch panel, Note: Row “Right” indicates the righthand side telco port, which could provide a better when you facing the back panel of GXW42XX V2, and cable management in most “Left” is the left telco port.
Page 5
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the GXW42XX V2 and is the answer not in the manual?
Questions and answers