3.Right-click on
Local Area Connection
Internet Protocol Version 4 (TCP/IPv4)
4.Select
and click on
Properties
.
Properties
and click on
.
5.Select "Use the following IP address" and enter the IP address, Subnet Mask,
Default Gateway. Click
OK
and close the Local Area Connection properties window.
4.2 Configure parameters
Connect the charger to a computer via a network cable. Open the web browser and
type in http://192.168.1.5:8080/ in the address field and click enter, then the
parameter setting page of the charger will open up.
Parameter setting can only be done via web browser on a computer. It is suggested to
use IE or Firefox, other browser might have compatibility problem.
Overview of Parameter setting page