Packaging List; Installation And Wiring - Project EV ATESS EVA-11S Quick Installation Manual

II.Packaging list
No. Name
1
Charger
2
User manual
3
Quality certificate
4
Mounting bracket
5 Cable hook
ST6.3X40
Stainless steel hex-head
6
self-drilling screws
12X46
7
Plastic expansion plugs
Qty Remark
1
1
1
1
1 For cabled version
4 for socket version, 7 for cabled
version(3 of the 7 screws is for
4-7
cable hook fixing)
4 for socket version, 7 for cabled
version(3 of the 7 plugs is for
4-7
cable hook fixing)
III.Installation and wiring
1.First determine the installation height of the charger. Then drill 4 holes on the wall
according to the distance and size marked below. If the charger is a cabled version,
drill another 3 holes below the charger for installation of cable hook. Take out the
hex head self-drilling screws and plastic expansion plugs. Hit the plastic expansion
plugs into the holes using hammer. Place the screws properly for later use.
2.Unscrew the 2 screws fixing the mounting bracket and place the screws properly
for later use. Place the mounting bracket onto the wall, align with the mounting
holes and fasten it with the hex-head screws. For cabled version charger, install the
cable hook using same method.