Table of Contents
Advertisement
Quick Links
Class I Medical Device, compliant with the Medical device directive 93/42/EEC
Warning
The information contained in this manual is subject to change without notice.
The Diagrams are inserted only for reference and may vary slightly from the actual device.
Spencer Italia S.r.l. assumes no responsibility for any errors contained herein or for damage, accidents or consequences connected with the supply,
performance or use of this manual.
First edition:
19/10/2015
Rev.0
19/10/2015
www.spencer.it | support.spencer.it - e-mail: info@spencer.it | service: service@spencer.it |Ph./Tel. +39.0521.541111
SPENCER ITALIA SRL
– Strada Cavi n° 7 – 43044 Collecchio (PR) - Italy
Quality System EN ISO 9001 – EN ISO 13485
User manual
Spencer 520
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Spencer 520
Summary of Contents for Spencer 520
-
Page 1: User Manual
The Diagrams are inserted only for reference and may vary slightly from the actual device. Spencer Italia S.r.l. assumes no responsibility for any errors contained herein or for damage, accidents or consequences connected with the supply, performance or use of this manual. -
Page 2: Table Of Contents
Warning The information contained in this document could be modified without any warning and is not to be intended as a commitment on behalf of Spencer Italia S.r.l. Spencer products are exported to many countries and the same identical regulations are not always valid. For this reason there could be differences between the description here described and the product actually delivered. -
Page 3: Models
SPENCER 520 INTENDED USE Spencer 520 is a device for recovery and transfer of patients to the main stretcher. It can be used in two configurations, which in this manual will be called “chair mode” and “stretcher mode”. It is not intended to carry the patient within the ambulance... -
Page 4: Symbols
Regardless of the level of experience gained previously with similar devices, it is recommended that you carefully read this manual before installing, operating or using the product or carrying out any maintenance. If in doubt, contact Spencer Italia S.r.l. to obtain the necessary clarifications. - Page 5 For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have to underline that a report regarding all operations carried out must be requested. This will permit both Spencer Italia S.r.l. and the end user to keep a log book regarding the operations carried out on the device.
-
Page 6: Specific Warnings
Regulatory requirements As a distributor or end user of products manufactured and/or marketed by Spencer Italia S.r.l., you are strictly required to have a basic knowledge of any legal requirements applying to the devices contained in this supply that are in power in the final... -
Page 7: Physical Requirements Of Operators
Each operator must be trained to transport patients safely SPENCER 520 and efficiently. Do not allow untrained persons to help operators during use of the product, as this may cause injury to themselves or to other people. -
Page 8: Technical Data And Components
TECHNICAL DATA AND COMPONENTS Note: Spencer Italia S.r.l. reserves the right to make changes to specifications without prior notice. N° Description Material N° Description Material Telescopic handles Steel/PVC Stretcher’s rear handles Backrest sheet Configuration change crossbar Steel Seay sheet Seat frame... -
Page 9: Installation And Start-Up
INSTALLATION AND START-UP Before the first use verify that: The packaging is intact and has protected the device during transport Check that are present all the components included in the accompanying list. Functionality of the device The sanitary vehicle is equipped with a safe housing or fastener intended for the device Do not modify for any reason the stretcher in the structural, leverage and traction parts. -
Page 10: Instructions For Use
11. INSTRUCTIONS FOR USE Before transferring, lifting or transporting the patient, primary medical evaluations have to be performed. Once the diagnosis has been assured, it is preferable (if possible) to suggest to the patient that he actively collaborates during transfer onto the stretcher, and to make sure the patient is fully aware of all risks. -
Page 11: Configuration Change
11.4 Configuration change During configuration change, the patient cannot be on the device. It is recommended a preliminar evalutation intended to choose the best configuration. Stretcher Mode -> Chair Mode The configuration change between stretcher mode and chair mode, takes place in these two steps: Raise the device from the telescopic handle’s side, and bring it up until vertical position is reached. -
Page 12: Cleaning And Maintenance
/ or operators. To maintain the polished appearance of the frame parts we recommend the use of polish cleaner Spencer STX 99 or in alternative creams or waxes used for polishing car bodywork. -
Page 13: Periodic Maintenance
For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have to underline that a report regarding all operations carried out must be requested. This will permit both Spencer Italia S.r.l. and the end user to keep a log book... -
Page 14: Special Servicing
For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have to underline that a report regarding all operations carried out must be requested. This will permit both Spencer Italia S.r.l. and the end user to keep a log book regarding the operations carried out on the device.
Need help?
Do you have a question about the 520 and is the answer not in the manual?
Questions and answers