Usb Operation; Specifications - Gogen MAXIRADIOG Instruction Manual

USB OPERATION

General operation
&
Playback
1. Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2. Set the "FUNCTION" selector to "CD / MP3 / USB" mode.
3. Press and hold the "PLAY / PAUSE / USB" button for a few seconds to entry USB mode.
4. Playback will start automatically from the first track.
5. Press the "STOP" button when finished.
6. Press the "PLAY / PAUSE / USB" button again, playback will start from the first track.
Program, mode
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to CD / MP3
OPERATION.
AUTOMATIC STANDBY SWITCHING
To comply with the "ERP2 (Energy Related Products)" Ecodesign Directive (2009/125/EG), its
ultimate aim is to reduce the energy consumption of energy-using products; the device
automatically switches to standby after approx. 10 minutes without a signal. In order to use the
device again, switch the device off and then on again.

SPECIFICATIONS

Power requirement:
Output power:
Dimensions:
Weight (NET):
WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIFICATIONS.
Press to start playing tracks from the USB .
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the
sound.
STOP Press to stop all USB operation.
230 V/50 Hz
2 × 1 W
235 × 232 × 124 mm
1350g
EN - 32